ePTFE Sheet Thickness and Size — 1–10 mm, Up to 1520×1520 mm
Liantuo ePTFE sheet is 100% expanded PTFE, listed at 1–10 mm thick and up to 1520×1520 mm for in-house cutting. Email thickness and sheet count to sales@liantuoptfe.com.
ePTFE sheet, 1–10 mm thick, up to 1520×1520 mm is 100% ePTFE flat sealing stock for cutting, as listed on the product page. This page only covers the listed thickness and format. It is not a retarget of the sheet product page.
For the stock-versus-finished-part chooser, see ePTFE sheet vs custom-cut gasket. If you want Liantuo to cut the finished shape, see how to RFQ a custom-cut ePTFE gasket from a drawing and custom-cut ePTFE gaskets when you want a finished shape.
Listed thickness
The owned listing is 1–10 mm. A finer step table is not listed, as of 2026-11-13. Not listed — confirm with the quote. State the thickness you need in the quote. Custom thickness, if discussed, is on request and must be confirmed with the quote; it is not a second published size list.
Listed format
The owned format is up to 1520×1520 mm. Other standard sheet sizes are not listed, as of 2026-11-13. Do not replace that figure with a peer catalog size. If your blank is larger than 1520×1520 mm, email the dimensions you need and confirm whether they can be quoted. Not listed — confirm with the quote.
In-house cutting vs factory-cut
Buy this sheet when your shop will cut on demand from the listed 1–10 mm stock, up to 1520×1520 mm. If you want a factory-cut gasket, send a drawing, DXF, or sample. Factory-cut gaskets are cut by water jet or knife, with no mold cost, on the gasket path linked above.
Owned listed envelope (dated 2026-11-13)
The figures below come from the Liantuo sheet product page. No invented thicknesses, formats, pressure, or leak figures.
| Attribute | Liantuo ePTFE sheet /expanded-ptfe-sheet.html | Other sizes / peer catalogs |
|---|---|---|
| Material | 100% ePTFE | Not listed as a Liantuo variant, as of 2026-11-13 |
| Thickness listed | 1–10 mm | Other thicknesses not listed, as of 2026-11-13. Not listed — confirm with the quote. |
| Format listed | Up to 1520×1520 mm | Other standard formats not listed, as of 2026-11-13 |
| Use | In-house cutting of flat shapes | Factory-cut path is the gasket PDP / drawing RFQ guide |
| Samples | Available; Jiaxing | — |
FAQ
What ePTFE sheet thickness and size does Liantuo list?
Thickness 1–10 mm, and a format up to 1520×1520 mm, on the expanded PTFE sheet product page. Do not assume other published sizes.
Can I cut gaskets from this sheet in my shop?
Yes. The listed sheet is 100% ePTFE cutting stock for in-house work. If you want Liantuo to cut the finished shape, send a drawing, DXF, or sample instead.
Do you publish a full thickness step chart?
The owned listing is the 1–10 mm range and the 1520×1520 mm format. A finer step table is not listed, as of 2026-11-13. State the thickness you need in the quote.
What if my blank is larger than 1520×1520 mm?
That format is the listed maximum. Do not invent a larger catalog size. Email the dimensions you need to sales@liantuoptfe.com and confirm whether they can be quoted.
How do I request a sample or a sheet quote?
Email sales@liantuoptfe.com with thickness, sheet size or sheet count, media and temperature if known, quantity, and ship-to. Samples are available from Jiaxing. MOQ is confirmed with each quote.
Quote path at Liantuo
Email sales@liantuoptfe.com with thickness, sheet size or sheet count, media and temperature if known, quantity, and ship-to. Samples are available from Jiaxing. MOQ is confirmed with each quote.
Email sales@liantuoptfe.com to request a quote or samples.
Also see ePTFE articles and buyer guides.