Forming properties of ETFE plastic raw materials.

Update:13 Oct 2018
Summary:

1. Crystallized material, low moisture absorption. It c […]

1. Crystallized material, low moisture absorption. It can be processed into articles by processing methods which are usually made of thermoplastics.
2. Poor fluidity, easy to decompose, and corrosive gas generated during decomposition. Strictly control the molding temperature not to exceed 350 degrees, the mold should be heated to 100-150 degrees, the casting system should have a small resistance to flow, and can form thin-walled simple products of 0.7-0.8 mm thick.
3. Transparent pellets, injection molding, extrusion molding. The molding temperature is 300-330 degrees, and 350 degrees or more is liable to cause discoloration or bubble generation. It is suitable for high-speed low-pressure molding, and it is difficult to take off the mold.